Vehicle-mounted countermeasure device DJ-C800

The drone jamming device adopts the principle of wireless electromagnetic wave interference at the same frequency to forcibly control the drone. It can remotely control the drone with multiple functions such as one click drive away, one click emergency landing, and automatic video cut-off, thus eliminating " Illegal flying".
$1,000.00
Quantity
Description

1. Product functional advantages

1) The device is portable, has good concealment, is not easily discovered, and is not easily targeted.

2) The luggage can be customized according to the customer's car model to meet actual usage needs.

3) The main units of the countermeasure equipment are all located in the luggage compartment, without any external antenna leaks, and adopt a built-in integrated design; The battery has shock absorption, anti drop and explosion-proof functions, with both DC and AC capabilities, which can meet various electrical needs.

4) Customized high-power battery power supply, placed in the trunk of the car, to meet the safety guarantee of leaders' travel at any time.

5) This system adopts directional high gain antennas, arranged on four sides inside the luggage compartment, with 360 degree comprehensive coverage, to cope with all drone tracking and attacks.

6) Vehicle mounted vehicles can travel to any important location and drone defense area (2000m radius). The specific defense area should be determined based on the signal strength of the local usage environment to ensure safety in low altitude areas and the safety of leaders.

7) During vehicle operation, corresponding defense zones can be activated as needed (this system is divided into four zones: front, rear, left, and right), each with independent control switches for use in different environments.

 

2. Technological erosion

NO

Frequency band

Power

Quantity

Power

1

400-450MHz

70W

4

280W

2

760-860MHz

100W

4

400W

3

860-930MHz

100W

4

400w

4

1040-1220MHz

80W

4

320W

5

1220-1390MHz

80W

4

320W

6

1380-1460MHz

80W

4

320W

7

1550-1630MHz

80W

4

320W

8

2400-2500MHz

120W

4

480W

9

5150-5350MHz

80W

4

320W

10

5350-5550MHz

80W

4

320W

11

5550-5750MHz

80W

4

320W

12

5750-5950MHz

100W

4

400W

Total Power Consumption9000W        AC220V/DC28V320A

Customized design is adopted on all four sides of the equipment; For various unmanned aerial vehicles, time traveling aircraft, assembled aircraft, fixed wing and other series of unmanned aerial vehicles

 

 

3. product image

 

Physical picture of car battery

 

Different installation modes can be customized according to different vehicle models, as shown in the following example

 

4. Warranty and Disclaimer:

1) Enjoy a one-year official national warranty.

2) Due to the special nature of radio frequency products and the significant impact of environmental factors, we only guarantee that the relevant technical parameters of the product, such as frequency, frequency band, and power, meet the requirements, and the effectiveness of the tested site and model. We do not guarantee the effectiveness of any other untested environments or models.

3) When using wireless devices, please comply with relevant national and local laws and regulations; Therefore, those who violate relevant laws and regulations shall bear the consequences themselves.

 

5. Basic working principle:

1) After interfering with satellite navigation signals, the drone cannot automatically return, but it can be remotely controlled.

2) After simultaneously interfering with satellite navigation signals (1.5G) and remote control and image transmission (2.4G or 5.8G), the drone cannot return and cannot be remotely controlled. It will hover or make an emergency landing according to the drone's program settings.

3) After interfering with both image transmission and remote control signals, the drone cannot be remotely controlled, unable to transmit videos and images. According to the drone's setting program, it can return, make an emergency landing, or hover.

4) Simultaneously interfering with satellite navigation signals (1.5G), remote control signals (2.4G or 5.8G), and image transmission signals (2.4G or 5.8G). The drone cannot return, cannot control its return, and cannot transmit videos or images. Hover and make an emergency landing according to the drone setup program.

5) According to different models and brands of drones, there may be differences in the actual actions performed by drones after interference.

 

6. Operation method:

1) Interference with remote control and image transmission signals, while turning on 2.4G and 5.8G switches; Pull the trigger and hold, make a beep sound, start firing signals, aim at the drone.

2) Interference with satellite, remote control, and image transmission signals, while turning on GPS (1.5G), 2.4G, and 5.8G switches, pulling and holding the trigger, emitting a beeping sound, and aiming at the drone.

3) After use, turn off the GPS (1.5G), 2.4G, and 5.8G switches to prevent accidental trigger pulling; Turn off the battery voltage display switch.

4) Charging: Open the waterproof and dust proof plug of the charging dock at the bottom of the battery compartment, insert the charger plug into the charging port at the bottom of the battery compartment, and the charger indicator light will turn red, indicating that it is charging; The indicator light for charging completed (or not plugged in the charger) is green.

5) Check battery voltage: Turn on the switch on the battery to instantly display the battery voltage; When the battery voltage is below 22V, even when charging.